| How to Use Heat Tape. |
| 1. |
Heat machine up to at least 300 degrees. |
| 2. |
Put die on part and position under hot stamp head. |
| 3. |
Pull the machine handle to make sure that the head comes in contact with
the die. |
| 4. |
Put heat tape all over the die. Make sure that there are no
wrinkles. |
| 5. |
Pull the machine handle, lower the head, and count to 20. Allow the heater head to return to the up position. |
| 6. |
Count to 20 with the head up. This will allow the heat tape and die to heat up. |
| 7. |
Pull the machine handle, lower the head, and count to 20. Allow the heater head to return to the up position. |
| 8. |
Wait a minute for the Heat Tape to setup. The machine is ready to run. |
|
| Video |
|
|